CGC - The 2026 1st China UAV Wind Turbine Blade Inspection Measurement & Innovative O&M Scenario Demonstration Event Successfully Held
  • 2026-08-23

The 2026 1st China UAV Wind Turbine Blade Inspection Measurement & Innovative O&M Scenario Demonstration Event Successfully Held

From August 13 to 14, the 2026 1st China UAV Wind Turbine Blade Inspection Measurement & Innovative O&M Scenario Demonstration Event, co‑hosted by China General Certification Center (CGC) and SZ DJI Technology Co., Ltd., and undertaken by CGN (Hubei) New Energy Investment Co., Ltd., was successfully held at the CGN (Hubei) New Energy Technical Service Center in Dawu County, Hubei Province. Authoritative experts from major power‑generation enterprises and representatives of operation‑and‑maintenance (O&M) solution providers gathered on site. Carrying out on‑site UAV blade inspection measurement and demonstrations of multiple innovative O&M scenarios at an operational wind farm, participants discussed plans for high‑quality development of intelligent wind‑power O&M.

Parallel to the event, CGC and CGN jointly unveiled the “Simulation and Demonstration Base for New‑Energy Intelligent O&M Equipment”, marking the entry of their strategic cooperation on verification and evaluation of new‑energy intelligent O&M equipment into the physical operation phase.

Industry Background: Address Common Pain Points of Wind‑Power O&M via Field Measurement

China’s wind‑power industry is entering a new era of intelligent O&M, with new technologies such as UAV‑based blade inspection, UAV lightning‑protection continuity testing and robotic flaw detection being rapidly deployed. Nevertheless, the industry has long suffered from common pain points including inconsistent evaluation criteria, lack of field‑measured evidence for equipment selection, and difficulties in quantitative comparison of O&M solutions. There is an urgent need for implemented standards and authoritative third‑party evaluation.

With long‑term in‑depth engagement in the new‑energy sector, CGC has accumulated profound experience in standard development, testing & certification and technical evaluation. Hosting this event constitutes a key initiative of CGC to respond to industry pain points and concerns of power generators. It aims to build an objective, impartial and quantifiable demonstration platform for intelligent O&M technologies. Guided by field measurement, CGC will drive standard formulation and the development of third‑party evaluation products.

Unveiling Ceremony: Co‑build Demonstration Platform and Lead Standard Development

On the morning of August 13, the unveiling ceremony for the “Simulation and Demonstration Base for New‑Energy Intelligent O&M Equipment”, jointly built by CGC and CGN, took place at CGN Dawu Technical Service Center. Representatives from power‑generation enterprises and O&M solution providers witnessed this industry milestone.

The base serves as the physical carrier for the two parties’ strategic cooperation. CGC gives full play to its strengths as a third‑party body in standard‑setting, testing‑certification and technical evaluation, taking the lead in constructing the base’s evaluation system. CGN provides real‑world resources of operational wind and photovoltaic power plants. The two sides jointly build a complete closed‑loop of “standard development — field demonstration & measurement — grading evaluation — achievement transformation”, filling the gap of lacking an authoritative third‑party demonstration platform in the new‑energy intelligent O&M sector.

At the unveiling ceremony, CGC stated that this event is conducted under unified conditions and rules based on real‑world O&M scenarios of operational wind farms, with objective evaluation supported by measured data. Going forward, field measurement and demonstration for various intelligent O&M equipment will be carried out on a regular basis to select efficient and cost‑effective O&M solutions. This will help new‑energy power stations cut costs and boost efficiency, and foster an open and shared intelligent O&M industrial ecosystem.

Blade‑Inspection Field Measurement: Seven‑dimensional Quantitative Evaluation for Selection of Optimal Industry Solutions

As the core session of the event, CGC took the lead in compiling the Detailed Scoring Rules for UAV Wind‑Turbine Blade Inspection Field Measurement after multiple rounds of expert seminars. The rules were endorsed by power generators and O&M solution providers including SPIC, Longyuan Power, Huaneng Clean Energy Research Institute, Three Gorges Energy, Envision Digital, CGN, DJI Innovations, Zhongke Lifeng, Robovision, and Zongxin Hanchuang. On this basis, CGC further compiled the Referee Manual, which sets unified provisions for assessment workflows, scoring thresholds, blind‑review rules and dispute arbitration, ensuring well‑regulated measurement practices and consistent judging criteria.

For this field measurement, three operational wind turbines with different locking attitudes at CGN Jiangjiashan Wind Farm were selected as inspection objects. The tested turbines feature 53.8‑meter‑long blades and an 80‑meter tower height. The on‑site measurement was conducted under overcast weather with wind speeds ranging from 10 m/s to 16 m/s.

Eight organizations including Tuzhitianxia, Robovision, Nantong Huoyan, Zhongke Lifeng, Zongxin Hanchuang, Zhongke Fangcun, Rookai Intelligence and Shanghai Peiqian participated in the full measurement activity. CGC set up a referee panel composed of senior experts from major power‑generation enterprises. Participating teams were comprehensively assessed across seven dimensions: operation efficiency, automation level, operation safety, scenario adaptability, cost‑effectiveness, defect recognition capability and report generation capability. Assessment results were visualized via a seven‑dimensional capability chart.

According to assessment results, participating teams delivered overall satisfactory performance in operation safety, scenario adaptability and report‑generation capability. Operation efficiency, cost‑effectiveness and defect‑recognition capability are areas to be improved for most participants. Radar charts enable intuitive quantitative comparison of capability gaps among solutions from different enterprises, delivering objective visual references for equipment procurement by power generators. Meanwhile, this field measurement has accumulated valuable first‑hand data for the base to optimize assessment indicators, iterate evaluation methodologies and promote industry standard‑setting.

Scenario Demonstration: Focus on Cutting‑edge Technologies to Solve Industry Pain Points

The innovative O&M scenario demonstration also featured many highlights. Demonstration scenarios were jointly selected by CGC, DJI Innovations, CGN and multiple power‑generation enterprises. Targeting practical pain points and technical gaps in O&M practice for power generators, cutting‑edge application scenarios were arranged including non‑shutdown emergency inspection, blade lightning‑receptor continuity testing and tower flaw detection. Enterprises such as Robovision, Nantong Huoyan, Zhongke Lifeng, Huixi Technology and Tuzhitianxia conducted on‑site operation demonstrations with multiple new‑generation intelligent devices, fully highlighting the prominent advantages of intelligent O&M technologies in shortening operation duration, avoiding high‑altitude risks and improving detection accuracy.

At the demonstration site, experts from power‑generation enterprises and exhibitors held in‑depth exchanges covering technical feasibility, scenario adaptability and economic rationality. For all demonstrated projects, CGC will push forward relevant standard development and certification‑service development, providing solid decision‑making support for owners in selecting and procuring new technologies and products.

Technical Exchange: Build Industry Consensus and Explore Development Paths

Parallel to the main event, CGC organized multiple special technical exchange sessions. Front‑line industry experts conducted in‑depth discussions on hot topics such as UAV inspection algorithms, intelligent recognition, lightning‑protection continuity testing and intelligent tower flaw detection, and shared latest research outcomes and engineering experience.

During the closed‑door seminar, participants fully exchanged views on prominent industry pain points including low‑bid competition and the absence of evaluation standards. CGC will systematically sort out outcomes from these exchanges as important references for compiling the White Paper on UAV Wind‑Power Inspection Industry and revising the assessment‑indicator system, translating industry consensus into standardized deliverables.

Embark on a New Journey: Drive Industrial Upgrading via Practical Demonstration

This event serves as a practical drill for the wind‑power intelligent O&M‑equipment sector. Taking the inauguration of the demonstration base and the inaugural measurement event as a new starting point, CGC will continuously deepen strategic cooperation with CGN. Relying on the platform, regular industry‑wide field measurement, demonstration and technical exchanges will be held to help outstanding O&M solutions stand out. To address prominent pain points such as low‑bid competition and lack of unified evaluation criteria for UAV wind‑power inspection, CGC will jointly compile the White Paper on UAV Wind‑Power Inspection Industry with power generators and O&M solution providers. It will launch the service of “Application‑performance Evaluation and Grading for UAV Wind‑Turbine Blade Inspection”, promote service‑quality improvement via standardized assessment, and steer the industry away from low‑price competition toward quality‑oriented competition.

Looking ahead, the demonstration base will keep expanding multi‑scenario measurement capabilities for wind and photovoltaic power, and iteratively improve the full‑category quantitative evaluation system for intelligent O&M equipment. Empowering O&M‑technology innovation through practical measurement and demonstration, it will inject strong impetus into the safe, efficient and high‑quality development of China’s new‑energy industry.