CGC - CGC Conducts SSDA Assessment for Mingyang’s Tunisia Project as Chinese‑Manufactured Wind Power Accelerates Global Expansion
  • 2026-10-23

CGC Conducts SSDA Assessment for Mingyang’s Tunisia Project as Chinese‑Manufactured Wind Power Accelerates Global Expansion

Recently, China General Certification Center (CGC) issued a Site‑Specific Design Assessment (SSDA) report for the 6.25 MW wind turbine generators of Mingyang Smart Energy’s STEG Sidi Daoud A project in Tunisia. This marks the first wind power project implemented by a Chinese equipment manufacturer in Tunisia. Following CGC’s type‑certificate support for Mingyang’s bid evaluation success, it also represents the first‑ever in‑depth technical service delivered by a Chinese third‑party certification body for a Tunisian wind project, covering unit safety assessment and facilitating project financing.

A New Wind‑Power Benchmark on the Southern Mediterranean Shore

The STEG Sidi Daoud A project is located in the Sidi Daoud area on Tunisia’s Cap Bon Peninsula, one of Tunisia’s richest wind‑resource zones and a core hub for national wind‑power development since the early 2000s. Boasting a total capacity of 31.25 MW, Mingyang Smart Energy’s Tunisian STEG Sidi Daoud A project deploys five MySE182‑6.25 MW turbines with a hub height of 110 meters. Developed by Tunisia’s state‑owned Société Tunisienne de l’Électricité et du Gaz (STEG), the project receives financing support from Kreditanstalt für Wiederaufbau (KfW) of Germany. Upon completion, the project will connect directly to Tunisia’s national power grid and deliver stable, clean electricity to local communities.

Matching Real‑World Wind Conditions of International Projects to Guarantee Full‑Life‑Cycle Safety

Type certification answers whether “turbine design complies with general standards”, whereas Site‑Specific Design Assessment and Certification (SSDA) addresses whether “this turbine can operate safely for 20 years when deployed at this wind‑farm site”. Given divergent terrain and climate across wind‑farm sites, design assumptions under type certification often cannot fully reflect real‑world on‑site conditions. Based on standards including IEC 61400‑1, SSDA conducts item‑by‑item evaluation on modules such as site‑specific loads, RNA design and site‑specific tower design to verify safety and fitness‑for‑purpose at the target location. For international financiers such as KfW, this serves as an independent third‑party risk validation for long‑term project returns and asset security.

In 2025, CGC granted type‑certification for this Mingyang turbine model and supported its successful bid award. Prior to turbine shipment, at the request of project developer STEG, CGC performed an SSDA assessment tailored to actual on‑site environmental conditions. This assessment is “site‑wind‑parameter‑based”: adaptive evaluation covering the turbine’s 20‑year design lifetime is carried out using real‑world wind‑resource data, turbulence intensity and extreme wind conditions recorded at the Sidi Daoud site, instead of simply adopting generic design load cases. The certification outcomes directly answer two core questions: does the turbine maintain sufficient load margin under local‑site wind parameters? Can structural safety and reliability be sustained throughout its 20‑year design service life? Such real‑condition‑oriented assessment is particularly critical for the Sidi Daoud region subject to persistent sea‑land breezes and Mediterranean climate, and builds greater confidence among owners and financiers regarding long‑term turbine operation.

Chinese Third‑Party Technical Services Go Global

Co‑operation between CGC and Chinese equipment manufacturers keeps deepening across international projects, ranging from general‑requirement‑oriented type certification to SSDA assessment and certification customized for local‑site environments and actual turbine configurations. This case reflects profound shifts within the global expansion of China’s whole wind‑power industrial chain: not only hardware such as turbines and blades are exported worldwide, but sophisticated technical services including testing, certification and assessment are taking on key roles on the international stage. Going forward, CGC will continue delivering independent, professional and international‑grade third‑party technical services to safeguard more overseas deployment projects of Chinese wind‑power equipment, and jointly establish “Made‑in‑China” and “Certified‑by‑China” as trusted options for the global marketplace.