On the land of magnificent Xinjiang endowed with abundant wind and solar resources, a roundtable dialogue themed “Collaborative Innovation: How to Build a High-Quality, High-Standard PV+ Ecosystem” concluded successfully.

On October 24, 2025, the 2025 Forum on High-Quality Development and Technical Standards of the PV Industry, co-hosted by China Electronics Standardization Institute and China Photovoltaic Industry Association, was grandly held. At the Forum on PV System Quality Improvement and Technical Standard Innovation (Sub-forum II), a roundtable dialogue centering on the high-quality, high-standard PV+ ecosystem was carried out.
The dialogue was hosted by Zhou Gang, General Manager of the Solar Energy Division of China General Certification Center (CGC). Speakers including Liu Tongfei, PV Director of the Design & Assessment Center, China Resources Power Technology Research Institute; Li Zhenming, Deputy General Manager of Zhejiang Chint Smart Energy Service Co., Ltd.; Li Xuefeng, Product Solution Expert of LONGi Green Energy Technology Co., Ltd.; Zhang Yao, President of Jiangsu Neusoft Intelligent Technology Co., Ltd.; Cheng Dongsheng, Deputy Director of Product Management of Renjie Intelligent Technology Co., Ltd.; and Liu Xiaoying, Senior Product Manager of Shanghai Charging Energy Technology Co., Ltd., attended the session. They conducted in-depth exchanges around six core topics: industry pain points, standard development, quality control, technology R&D, O&M optimization and development opportunities in Xinjiang, injecting intellectual momentum into the high-quality development of the PV+ industry.
Breaking Collaboration Barriers: Addressing Difficulties in PV-Storage-Charging Integrated Projects and Exploring Solutions
Q: In the broad application scenarios of “PV+”, especially during the implementation of PV-storage-charging integrated projects, what is the biggest collaboration obstacle from different stakeholders’ perspectives? Is it incompatible technical interfaces, confusion caused by missing standards, difficulties in cost allocation, or unclear revenue models?
Liu Tongfei from China Resources Power identified four core obstacles: incompatible technical interfaces, inconsistent standard systems, imbalance between costs and revenues, and poor revenue sustainability. He noted that the large difference in lifecycles — PV (25 years), energy storage (10–15 years), and charging piles (often treated as liability assets) — complicates investment accounting. PV, energy storage and charging piles follow separate standard systems, which easily lead to connection problems during installation and O&M. Full-feed-in projects bring limited returns. While public energy projects are popular, they face fierce competition and volatile pricing.
Liu Xiaoying from Charging Energy supplemented from the technical and revenue perspectives: equipment is currently supplied by diverse vendors with fragmented technical interfaces and communication protocols. Although an energy management system can unify parameters, extra R&D and testing resources are required. Meanwhile, energy storage relies heavily on a single revenue model of peak-valley arbitrage. The potential of PV and charging piles to participate in virtual power plants and power markets remains underutilized, and revenue models need to be clarified urgently. In addition, the industry lacks dedicated standards for PV-storage coordination, covering plant design, operational indicators and O&M specifications. This leaves no basis for project evaluation and hinders long-term efficient and safe operation.
Filling Standard Gaps: Developing Cross-Domain System Standards to Consolidate the Foundation of PV-Storage Coordination
Q: Existing standards mostly focus on individual equipment, while the holistic requirements of PV-storage systems are increasingly prominent. What cross-domain systematic standards do we urgently need to jointly formulate? How should these standards cover everything from equipment compatibility to system coordination, so as to guarantee efficient operation and quality assurance of PV-storage systems across various power plants?
Current separate standards for PV, energy storage and charging piles fail to meet the holistic requirements of PV-storage systems. Liu Xiaoying from Charging Energy proposed that the energy storage sector urgently needs to fill gaps in long-term reliability verification. For example, there are no unified industry analysis methods or test procedures for capacity degradation and thermal runaway of energy storage systems. Meanwhile, from the perspective of project operation, comprehensive evaluation indicators for PV-storage coordination should be sorted out to ensure stable long-term operation.
Liu Tongfei from China Resources Power further suggested prioritizing the formulation of PV-storage coordination interface standards, integrating emergency fire protection and grid dispatching requirements, and clarifying technical specifications for inverters and power conversion equipment. Energy storage has strict fire safety requirements, yet there are no unified standards for large-scale plants and distributed stations, which increases owners’ investment costs. It is necessary to align fire protection and grid dispatching standards to provide a compliance basis for owners and regulators. The industrial chain may jointly develop association standards or group standards first, which can be promoted after continuous improvement to strongly support the efficient operation of PV-storage systems.
Upholding the Quality Bottom Line: Focusing on the 25-Year Full Lifecycle and Safeguarding Long-Term Returns via Standards
Q: While paying attention to upfront investment costs, how can technical standards define requirements for “25-year full-lifecycle quality” and “system coordination efficiency”? This is not only key to project success but also a core driver guiding the industrial chain toward high-quality development.
Liu Tongfei from China Resources Power stated frankly that some projects have become “red-light projects” due to irradiation resource deviations and substandard equipment degradation, with return on investment dropping by 10%–20%. It is urgent to specify 25-year degradation rates in bidding documents and bind enterprises to service commitments through contracts. Continuous long-term O&M support is expected to mitigate quality risks in the middle and later stages of operation.
Li Xuefeng from LONGi Green Energy emphasized that the industry must break away from the trap of low-price competition and reach a consensus on “high value at fair price”. Enterprises’ sustainable development capabilities (such as R&D investment and long-term service capacity) should be included as bonus items in bidding. Technical standards covering the whole PV-storage-charging system shall be established to guide project design, procurement and O&M, protecting owners’ long-term benefits from the source.
Striking a Balance in R&D: Parallel Technical Innovation and Ecosystem Compatibility to Accelerate Industrial Collaboration
Q: When developing products, should equipment manufacturers pursue extreme technical breakthroughs, or prioritize compatibility, communication and schedulability with other links? How to strike a balance between technical innovation and ecosystem compatibility? Is it necessary to launch “ecosystem compatibility certification” to reduce integration friction and achieve coordinated progress across the industrial chain?
Zhang Yao from Jiangsu Neusoft Intelligent Technology offered his view: equipment R&D and ecosystem compatibility are not mutually exclusive but mutually reinforcing. “Technology R&D is the core, and ecosystem compatibility serves as the bridge.” Taking flexible mounting structures as an example, he pointed out that enterprises should improve load-bearing capacity while proactively adapting to different modules and plant scenarios. He suggested launching ecosystem compatibility certification to cut trial-and-error costs and facilitate efficient integration of brackets, modules, cleaning robots and other equipment.
Cheng Dongsheng from Renjie Intelligent said that cleaning robots, known as the “fourth major component” of PV systems, need marketization via a three-pronged approach: “technological breakthrough + ecosystem adaptation + certification endorsement”. Type tests are first conducted to verify technical characteristics, followed by third-party compatibility tests (e.g., module compatibility), and finally market access certification to enable seamless connection with plant O&M systems.
Resolving O&M Challenges: Tracing Root Causes and Strengthening Specifications and Feedback Mechanisms
Q: O&M is critical for verifying product and construction quality. Among quality inconsistencies and standard deviations encountered by O&M service providers in daily work, which links are the main sources? Are they defects from equipment manufacturing or errors during installation and construction?
Li Zhenming from Chint Smart Energy stated that O&M is the touchstone for project quality. Many problems at power plants only emerge during the O&M phase, mainly falling into two categories: product quality defects and non-compliant construction.
Most product quality issues relate to durability and frequently occur in the middle and later stages of the 25-year service life of power plants, such as module hotspots, diode failures, and inverter quality risks which require high vigilance. Standards must be strictly implemented and product quality well controlled.
Construction-related issues are more severe. Li Zhenming shared three typical cases: In one plant, MC4 connectors were used to splice DC cables and laid together with main AC cables in the same cable tray. The overheated MC4 connector caught fire and burned the 35kV main AC cable, disrupting power generation of the whole line. In another plant, insufficient cable burial depth led to cable damage and fire caused by agricultural rotary tillers. There was also a troubled plant suffering from both non-compliant construction and substandard products, where one-third of the tracking brackets are now misaligned in different directions...
For problems such as poor implementation of construction specifications and opportunistic construction practices, there are currently no mandatory industry standards to regulate construction work. This deserves urgent attention, and standards need to be tightened to guarantee owners’ revenue.
Charting Xinjiang’s Blueprint: Building a Global Benchmark for High-Quality PV-Storage Ecosystems
Q: Blessed with abundant wind and solar resources, Xinjiang stands at the forefront of building a new power system. What key action proposals would the guests put forward to build Xinjiang into a national and even global benchmark for a high-quality PV-storage ecosystem?
Liu Tongfei from China Resources Power proposed the strategy of “standards first + wind-solar resource mapping”, integrating project and transmission resources to build Xinjiang into a new energy power generation hub and support western economic development and national energy transition.
Li Zhenming from Chint Smart Energy recommended promoting “smart plant construction” and establishing a mature scientific operation system to improve the professionalism and stability of long-term plant O&M.
Li Xuefeng from LONGi Green Energy stressed that local wind and solar resources in Xinjiang can be leveraged to mitigate power volatility. High-energy-consuming high-end tech enterprises can be introduced to advance high-quality development in Xinjiang.
Zhang Yao from Jiangsu Neusoft Intelligent Technology said that flexible mounting structures should be fully utilized to deliver customized installation solutions for Xinjiang’s diverse terrains such as deserts and mountains, adapt to various project resources and support ecosystem development.
Cheng Dongsheng from Renjie Intelligent emphasized balancing “high quality” and “large-scale development” through unified standards, ecosystem coordination and professional certification based on massive wind and solar resources.
Liu Xiaoying from Charging Energy called for accelerated refinement of power market policies and pilot programmes for direct green power trading, to improve the economics of PV-storage projects and consolidate Xinjiang’s positioning as a high-quality PV-storage ecosystem hub.
As a representative of an authoritative third-party institution in domestic certification and standardization, Zhou Gang from CGC introduced that CGC has deeply participated in the formulation of more than 80 international standards, over 100 national standards and 120 industrial standards. Many self-developed technical specifications of CGC have been widely adopted across the industry. In addition, CGC has launched the “CGC PV Leader+ Evaluation System”, which fully covers new products, new materials and new application scenarios. CGC has released multiple pioneering test and evaluation methods, including the first-year degradation assessment method, rapid testing model for initial product power yield, and evaluation system for module compatibility with flexible brackets.
Zhou Gang noted that CGC will continue to cooperate with all industry stakeholders. Amid rapid PV technology iteration, CGC will give full play to its role as a technical supporter and bridge as a third-party body, safeguarding the high-quality and high-standard development of the PV industry in Xinjiang and across China.
This roundtable dialogue not only identified industry pain points and built development consensus, but also outlined a clear roadmap for the high-quality development of the PV+ industry. Going forward, with improved standards, technological coordination and joint ecosystem development, the PV+ ecosystem will gain stronger vitality and make greater contributions to achieving the “Dual Carbon” goals.